How to Resolve no sound problem on Ubuntu 18.04

A number of users report issue, no sound after installing Ubuntu 18.04, there is no sound from the computer,  Not from music, neither movies nor youtube. For some others Ubuntu 18.04 not detecting sound devices. There are many reasons for this issue, sometimes is related to a volume setting configuration, a misconfiguration in the speaker settings or can be that you have new hardware that is not supported. Whatever the reason, here we have 3 different solutions to fix no sound problem in Ubuntu.

Ubuntu 18.04 sound not working

 Before go ahead, check basic things first:

  • Some laptops have mute switches or keys on their keyboards — try pressing that key to see if it unmutes the sound.
  • Also check that you have not muted the application that you are using to play sound (for example, your music player or movie player).
  • If your computer has external speakers, make sure that they are turned on and that the volume is turned up.
  • Make sure that the speaker cable is securely plugged into the “output” audio socket on your computer.
  • Don’t forget to take a look at the volume controls of your devices to make sure they’re at acceptable levels.
  • Also, verify that the output volume is not muted on your computer and that the correct output device is selected.

  • Open the terminal.
  • Type alsamixer and press the Enter key. You will see the following output in your terminal.
  • Select your correct sound card by pressing F6.
  • Use the left and right arrow keys to select a volume control. and use up and down arrow keys to increase and decrease volume levels for each control.
  • Note: the currently selected item is shown in red.
  • If mixer control is muted, “MM” appears below the volume bar.
  • You can unmute control by pressing the m key. This changes “MM” to “OO.”
  • Now To exit alsamixer, press the Esc key.
READ  Steps to install sublime text 3 on Ubuntu 18.10 using terminal

Here another shot solution, reload ALSA which fixe the sound problem for you.

Open the terminal using Ctrl+Alt+T

Now run the following command in the terminal:

alsaloop

sudo alsa force-reload

Once it’s done, reboot your computer, and test your sound again to see if it is working.

If none of above solutions work for you, try reinstalling ALSA and PulseAudio that must be fix the problem for you.

Open your terminal, and enter the following commands:

sudo apt-get remove --purge alsa-base

sudo apt-get remove --purge pulseaudio

sudo apt-get install alsa-base

sudo apt-get install pulseaudio

sudo alsa force-reload

then reboot your system.

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *